AEG LAVATHERM 65179AV Notice D'utilisation page 13

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

THE DELICATE FUNCTION
To dry more lightly the sensitive and tem-
perature sensitive textiles (e.g. acrylic, vis-
cose). For fabrics with the symbol
the fabric label. Programme operates with
decreased heat.
THE SENSITIVE FUNCTION
To dry lightly of fabrics that are frequently
worn. Programme starts on full heat set-
ting, which is then decrease as the pro-
gramme continue to be lightly to the
laundry.
THE ANTICREASE FUNCTION
Extends anticrease phase (30 minutes) at
the end of the drying cycle to 90 minutes.
This function prevents laundry from crea-
ses. Laundry can be removed during the
anticrease phase.
THE BUZZER FUNCTION
When the buzzer function is activated you
can hear the buzzer at the:
• cycle end
• anti-crease phase start and end
• cycle interruption
The buzzer function is by default always
on. You can use this function to activate
or deactivate the sound.
THE DELAY START FUNCTION
Let to delay the start of a drying
programme by 3, 6 or 9 hours.
1.
Set the drying programme and func-
tions.
2.
Push the Delay start button as many
times as necessary.
To activate the Delay start function,
3.
push the Start/Pause button. The
LEDs (9H, 6H, 3H) change on each 3
hours.
STARTING A PROGRAMME
on
To activate the programme push the
Start/Pause button. The LED above the
push button changes the colour to red.
CHANGE A PROGRAMME
To change a programme, turn the pro-
gramme dial to
programme again.
AT THE END OF PROGRAMME
When the drying cycle is complete, LEDs
End and Filter are on . If the Buzzer func-
tion is on, an acoustic signal sounds inter-
mittently for about one minute.
The drying cycles (except for the
Wool care programme) are auto-
matically followed by an anti-
crease phase which continue
around 30 minutes. The laundry
can be removed during the anti-
crease phase (The laundry should
be taken out towards the end of
the anti-crease phase at the latest
to prevent creases from forming.) .
If Long anti-crease function is set,
the anti-crease phase is increased
by 60 minutes.
To remove the laundry:
1.
Turn the programme dial to
2.
Open the appliance door.
3.
Remove the laundry.
4.
Close the appliance door.
After each drying cycle: clean the
filter
(See chapter CARE AND CLEAN-
ING.)
ENGLISH
(off) and then set the
(off)
13

Publicité

Chapitres

Table des Matières
loading

Table des Matières