Bosch GCM 10 Professional Notice Originale page 32

OBJ_BUCH-1132-001.book Page 32 Thursday, January 28, 2010 10:16 AM
32 | English
Functional Description
Read all safety warnings and all in-
structions. Failure to follow the
warnings and instructions may re-
sult in electric shock, fire and/or se-
rious injury.
Intended Use
The power tool is intended as a stationary ma-
chine for making straight lengthways and cross-
ways cuts in wood. Horizontal mitre angles of
–48° to +48° as well as vertical bevel angles of
0° to 45° are possible.
The machine is designed with sufficient capacity
for sawing hard and softwood as well as press
and particle board.
The power tool is not suitable for cutting alumin-
ium or other non-ferrous metals or alloys.
Product Features
The numbering of the components shown refers
to the representation of the power tool on the
graphic pages.
1 Handle
2 On/Off switch
3 Locking lever
4 Retracting blade guard
5 Saw blade
6 Fence
7 Quick-action clamp
8 Insert plate
9 Scale for mitre angle (horizontal)
10 Fine scale
11 Locking bracket
12 Locking knob for various mitre angles
(horizontal)
13 Lever for mitre angle adjustment
(horizontal)
14 Detents for standard mitre angles
15 Saw table
16 Mounting holes
17 Holes for quick-action clamp
18 Allen screws of the saw table extension
19 Drill holes for extension bars
1 609 929 W07 | (28/1/10)
20 Saw-Table extension
21 Allen key (size 6 mm)/Phillips screwdriver
22 Fence extension
23 Stop screw for 33.9° bevel angle (vertical)
24 Stop bolt for 33.9° bevel angle (vertical)
25 Roller
26 Transport safety-lock
27 Dust bag
28 Blade guard
29 Transport handle
30 Clamping lever for fence extension
31 Adjustment knob for 33.9° bevel angle
32 Clamping lever for various bevel angles
(vertical)
33 Sawdust ejector
34 Allen screws (6 mm) of the fence
35 Ring/open-end spanner
(ring: 13 mm; open-end: 12 mm)
36 Recessed grips
37 Phillips screw (attachment of retracting
blade guard)
38 Spindle lock
39 Hexagon bolt for saw-blade attachment
40 Clamping flange
41 Interior clamping flange
42 Extension bar*
43 Clamping lever of the quick-action clamp
44 Threaded rod
45 Angle indicator (vertical)
46 Screws for insert plate
47 Length stop*
*Accessories shown or described are not part of the
standard delivery scope of the product. A complete
overview of accessories can be found in our acces-
sories program.
Bosch Power Tools