Telescopic Wand; Powerbrush; Turning The Powerbrush On/Off - Miele HS08 S 7000 Instructions D'utilisation

en
^ Press the release button on the
telescopic wand and pull the vacuum
hose handle upwards.
^ To increase the stability of the
vacuum cleaner, slip the elbow over
the vacuum hose so it engages.
For regular vacuuming, you will
need to snap the handle back into
the telescopic wand and place the
wand back into the bracket (see the
upper illustration).
Telescopic wand (see fig. 19 + 20)
^ Place the vacuum in an upright
position.
^ To unhook the telescopic wand from
the bracket, pull upward on the
handle.
^ To increase the stability of the
vacuum cleaner, slip the elbow over
the vacuum hose so it engages (see
fig. 18).
The telescopic wand is composed of
two interlocking tubes that can be
adjusted to the desired length.
^ Press the telescopic wand release
button (see arrow) to release the
tubes and adjust to the desired
height.
To store the wand, adjust the tubes
to the shortest length and place it
back into the bracket (see the upper
illustration).
12

Powerbrush

Recommended use
Always follow the flooring
manufacturer's cleaning and care
instructions.
The Powerbrush is particularly suitable
for cleaning and restoring crushed
carpet pile of wall to wall carpeting and
floor coverings subject to hard wear,
especially in high traffic areas.
,
Do not use the Powerbrush to
vacuum high quality, hand knotted
rugs, for example Berber or Persian
rugs, as well as extremely long piled
area rugs and carpets, e.g. shag.
There is a danger of the threads
being pulled out. Turn the
Powerbrush off to vacuum these
types of floor coverings and use
only low suction power.
,
Do not use the Powerbrush on
floors with a variable or uneven
surface. The brush could come in
contact with the floor and cause
damage.

Turning the Powerbrush On/Off

(see fig. 21)
The beater bar in the Powerbrush is
driven by a separate motor, which can
be switched on and off.
^ Press the "Carpet/Floor" button on the
handle.
The Powerbrush turns on. The indicator
on the control panel lights yellow.