Renson Cube Manuel page 131

3
B) Define TouchDisplay as main and/or secondary control
(Only with multiple TouchDisplays)
(Each TouchDisplay has to be connected to the fan, see 9.1.3.3.5)
1
2
3
Use ▼ and ▲ to set the control as repeater ("ON").
Confirm with ■.
In order to leave the Installer menu 'Device settings',
hold ■ for 3 seconds or simultaneously tap ▼ and ▲.
Select 'Device settings' in the Installer menu and confirm with ■.
Select the menu 'Main Controller' with ■.
Use ▼ and ▲ to set the control as main controller.
Confirm with ■.
Cube
®
EN
131