Renson Cube Manuel page 128

Cube
®
EN
9.1.3.3.5 • Connect fan
This menu allows you to connect an additional fan to 1 TouchDisplay or 2 TouchDisplays to 1 fan.
Never connect more than 2 fans to 1 main control.
1
2
3
4
128
Select 'Connect fan' in the Installer menu and confirm with ■.
The following screen appears.
A connection with the fan can now be established.
Shortly press the button marked LINK on the main pcb of the
Cube. The LED next to the button will now start to blink.
Press ■ on the TouchDisplay.
The bottom line on the display will now read 'Linking'.