Control Functions - Renson Cube Manuel

9.1.3 • Control functions
9.1.3.1 • Control modes
There are 2 different ventilation modes: Manual, Automatic.
You can switch between modes by shortly pressing (<1sec) ■.
• Automatic mode (= demand controlled mode)
1
The demand controlled regulation of the ventilation system will only work if the automatic
ventilation mode is active. This means that the extraction rate will automatically adapt itself
when the relative humidity rises, presence is detected in the toilets or when the CO
is surpassed in the kitchen. The extraction rate will again follow the preconfigured program
when the air quality is back to an acceptable level or when presence is no longer detected in
the toilets.
The ventilation system completes a preconfigured ventilation
program when the automatic mode is activated (see section
9.1.3.2.1). Just like you would program a thermostat, you
can also program your ventilation system according to a time
schedule.
ex.: 07:00 – L3 08:00 – L1
16:00 – L2 22:00 – L1
Cube
12:00 – L3 13:00 – L1
threshold
2
®
EN
113