Renson Cube Manuel page 115

Cube
®
EN
• Boost mode
You can boost the ventilation system by pressing ▼ for a
long time. This activates level 4 and the system will ventilate
at its maximum capacity. The boost mode can be interrupted
by pressing ▼ for a long time again. The boost mode will
automatically shut down after 3h15min and the system will
again ventilate according to the preconfigured ventilation
program.
The boost mode can also be activated from a Timer control
(night cooling). A time interval can be activated during which
the boost mode will remain active. The main control will be
locked (red blocks + key symbol) when the boost mode gets
activated on a Timer control. As soon as the timer reaches 0
again, the ventilation level follows the ventilation program and
the main control gets released.
When the boost mode gets activated on a timer control, you can
still release the main control by pressing ▼ for a long time.
115