Publicité
Les langues disponibles
Les langues disponibles
To update the settings for Tube Temperature, Climate Control,
or Humidity Level, tap MY OPTIONS from the Home screen, go
down the list of options, and select the setting. Refer to your
device user guide for more information on how to update the
device settings.
Cleaning and caring for your tubing
WARNING
Clean the device and its components according to the
schedules shown in this guide, to maintain the quality of the
device and to prevent the growth of germs that can adversely
affect your health.
CAUTION
• Do not use bleach, chlorine, or aromatic-based
solutions, moisturizing or antibacterial soaps or
scented oils to clean the device, the humidifier tub or
air tubing. These solutions may cause damage or affect
the humidifier performance and reduce the life of the
products. Exposure to smoke, including cigarette, cigar
or pipe smoke, as well as ozone or other gases, may
damage the device. Damage caused by any of the
foregoing, will not be covered by ResMed's limited
warranty.
• If any visible deterioration of a system component is
apparent (cracking, discoloration, tears etc.), the
component should be discarded and replaced.
Disconnecting
1. Pinch the cuff of the air tubing, and gently pull it away from
the device.
2. Hold both the cuff of the air tubing and the swivel of the mask,
then gently pull apart.
Note: Only hold and pull the cuff of the air tubing. Do not hold or
pull the tubing itself as it may cause damage.
Cleaning
The following instructions are for home cleaning. Instructions for
reprocessing devices intended for multi-patient re-use can be
found in the clinical guide.
You should clean the air tubing weekly as described.
1. Wash the air tubing in warm water using a household
dishwashing liquid. It should not be washed in temperatures
higher than 131ºF (55ºC). Do not wash in a dishwasher or
washing machine.
English
3
Publicité
