Publicité
Les langues disponibles
Les langues disponibles
These warning symbols are here to prevent
These warning symbols are here to prevent
injury to you and others.
injury to you and others.
Please follow them carefully.
Please follow them carefully.
After reading this section, keep it in a safe
After reading this section, keep it in a safe
place for future reference.
place for future reference.
WARNING
WARNING
STATE OF CALIFORNIA
STATE OF CALIFORNIA
PROPOSITION 65 WARNING
PROPOSITION 65 WARNING
(US ONLY)
• Cancer and Reproductive Harm - www.
P65Warnings.ca.gov.
• Cancer and Reproductive Harm - www.
P65Warnings.ca.gov.
WARNING
WARNING
CRITICAL INSTALLATION
CRITICAL INSTALLATION
WARNINGS
WARNINGS
- Deteriorated insulation on electrical parts may
- Deteriorated insulation on electrical parts may
cause an electric shock or fire.
cause an electric shock or fire.
• Do not place this refrigerator in direct sunlight
• Do not place this refrigerator in direct sunlight
or expose it to the heat from stoves, room
or expose it to the heat from stoves, room
heaters, or other appliances.
heaters, or other appliances.
• Do not plug several appliances into the same
• Do not plug several appliances into the same
multiple power strip.
multiple power strip.
The refrigerator should always be plugged into
The refrigerator should always be plugged into
its own individual electrical outlet which has a
its own individual electrical outlet which has a
voltage rating that matches the voltage listed
voltage rating that matches the voltage listed
on the refrigerator's rating plate.
on the refrigerator's rating plate.
- This provides the best performance and
- This provides the best performance and
also prevents overloading of house wiring
also prevents overloading of house wiring
circuits, which could cause a fire hazard from
circuits, which could cause a fire hazard from
overheated wires.
overheated wires.
• If the wall socket is loose, do not insert the
• If the wall socket is loose, do not insert the
power plug.
power plug.
- There is a risk of electric shock of fire.
- There is a risk of electric shock of fire.
• Do not use a power cord that has cracks or
• Do not use a power cord that has cracks or
abrasion damage along its length or at either
abrasion damage along its length or at either
end.
end.
0:46:18
DA68-02601C-06-(EN+ES+FR).indd 3
DA68-02601C-06-(EN+ES+FR).indd 3
DA68-02952A-11.indb 3
DA68-02952A-11.indb 3
Note.
Note.
• Do not install the refrigerator in a damp
• Do not install the refrigerator in a damp
location or place where it may come in
location or place where it may come in
contact with water.
contact with water.
• Do not bend the power cord excessively or
• Do not bend the power cord excessively or
place heavy objects on it.
place heavy objects on it.
• Do not twist or tie the power cord.
• Do not twist or tie the power cord.
• Do not hook the power cord over a metal
• Do not hook the power cord over a metal
object, place a heavy object on the power
object, place a heavy object on the power
cord, insert the power cord between objects,
cord, insert the power cord between objects,
or push the power cord into the space behind
or push the power cord into the space behind
the appliance.
the appliance.
• When moving the refrigerator, be careful not to
• When moving the refrigerator, be careful not to
roll over or damage the power cord.
roll over or damage the power cord.
- This may result in an electric shock or fire.
- This may result in an electric shock or fire.
• Never unplug your refrigerator by pulling on the
• Never unplug your refrigerator by pulling on the
power cord.
power cord.
Always grip the plug firmly and pull straight out
Always grip the plug firmly and pull straight out
from the outlet.
from the outlet.
- Damage to the cord may cause a short-circuit,
- Damage to the cord may cause a short-circuit,
fire, and/or electric shock.
fire, and/or electric shock.
• Do not use aerosols near the refrigerator.
• Do not use aerosols near the refrigerator.
- Using aerosols near the refrigerator may cause
- Using aerosols near the refrigerator may cause
an explosion or fire.
an explosion or fire.
• Do not install this appliance near a heater or
• Do not install this appliance near a heater or
inflammable material.
inflammable material.
• Do not install this appliance in a humid, oily,
• Do not install this appliance in a humid, oily,
or dusty location, or in a location exposed to
or dusty location, or in a location exposed to
direct sunlight or water (rain, etc.).
direct sunlight or water (rain, etc.).
• Do not install this appliance in a location where
• Do not install this appliance in a location where
gas may leak.
gas may leak.
- This may result in an electric shock or fire.
- This may result in an electric shock or fire.
• This refrigerator must be properly
• This refrigerator must be properly
located and installed in accordance
located and installed in accordance
with the instructions in this manual
with the instructions in this manual
before you use it.
before you use it.
• Connect the power plug in the proper position
• Connect the power plug in the proper position
with the cord hanging down.
with the cord hanging down.
- If you connect the power plug upside down,
- If you connect the power plug upside down,
the wire can get cut o and cause a fire or
electric shock.
electric shock.
• When moving the refrigerator, be careful not to
• When moving the refrigerator, be careful not to
roll over or damage the power cord.
roll over or damage the power cord.
- This constitutes a fire hazard.
- This constitutes a fire hazard.
• Make sure that the power plug is not crushed
• Make sure that the power plug is not crushed
or damaged by the back of the refrigerator.
or damaged by the back of the refrigerator.
• Keep the packing materials out of reach of
• Keep the packing materials out of reach of
children.
children.
-
-
There is a risk of death from su ocation if a child
puts the packing materials on his or her head.
puts the packing materials on his or her head.
• The appliance must be positioned so that the
• The appliance must be positioned so that the
plug is accessible after installation.
plug is accessible after installation.
- Failing to do so may result in an electric shock
- Failing to do so may result in an electric shock
or fire due to electric leakage.
or fire due to electric leakage.
• You need to remove all the protective plastic
• You need to remove all the protective plastic
film before you initially plug the product in.
film before you initially plug the product in.
English - 3
English - 3
English - 3
English - 3
2018-09-05
10:48:42
Publicité
