Samsung RF26HFEND Serie Mode D'emploi page 10

When moving your refrigerator When moving your refrigerator
To prevent fl oor damage, be sure the front To prevent fl oor damage, be sure the front
adjusting legs are in the up position (above adjusting legs are in the up position (above
CAUTION CAUTION
the fl oor). Refer to 'Adjusting the Level' in the fl oor). Refer to 'Adjusting the Level' in
the manual (on page 11). the manual (on page 11).
Flat-blade screw Flat-blade screw
Control Lever Control Lever
driver(-) driver(-)
FLOORING FLOORING
For proper installation, you must place this For proper installation, you must place this
refrigerator on a level, hard surface that is the refrigerator on a level, hard surface that is the
same height as the rest of the fl oor. same height as the rest of the fl oor.
This surface should be strong enough to support This surface should be strong enough to support
a fully loaded refrigerator. a fully loaded refrigerator.
To protect the fi nish of the fl ooring, cut a large To protect the fi nish of the fl ooring, cut a large
section of the cardboard carton and place it under section of the cardboard carton and place it under
the refrigerator where you are working. the refrigerator where you are working.
When moving the refrigerator, you need to pull When moving the refrigerator, you need to pull
and push it straight forwards or back. and push it straight forwards or back.
Do not wiggle it from side to side. Do not wiggle it from side to side.
DA68-02601C-06-(EN+ES+FR).indd 10 DA68-02601C-06-(EN+ES+FR).indd 10
DA68-02601C-00.indb 8 DA68-02601C-00.indb 8
ACCESSORIES AND ACCESSORIES AND
REQUIRED TOOLS REQUIRED TOOLS
The following accessories are included with your The following accessories are included with your
refrigerator: refrigerator:
Compression Nut (1/4") Compression Nut (1/4")
Required Tools (Not provided) Required Tools (Not provided)
You need the following tools to complete the You need the following tools to complete the
installation of your refrigerator: installation of your refrigerator:
Philips Philips Flat-blade screw Flat-blade screw
screwdriver(+) screwdriver(+)
REMOVING THE REMOVING THE
REFRIGERATOR DOORS REFRIGERATOR DOORS
For some installations you need to remove the For some installations you need to remove the
fridge and freezer drawers so you can move the fridge and freezer drawers so you can move the
refrigerator to its fi nal location. Do not remove refrigerator to its fi nal location. Do not remove
the doors/drawer if you don't need to. If you do the doors/drawer if you don't need to. If you do
not need to remove the refrigerator doors, go to not need to remove the refrigerator doors, go to
Adjusting the Level on page 11. If you need to Adjusting the Level on page 11. If you need to
remove the doors. continue below. remove the doors. continue below.
Before removing the door/drawer, make sure you Before removing the door/drawer, make sure you
read the following items: read the following items:
Disconnect power to the refrigerator before Disconnect power to the refrigerator before
removing the door or drawer. removing the door or drawer.
WARNING WARNING
• Be careful not to drop, damage or • Be careful not to drop, damage or
scratch the door/drawer while removing scratch the door/drawer while removing
them. them.
• Use care when remove the doors/drawer. • Use care when remove the doors/drawer.
The doors are heavy and you could injure The doors are heavy and you could injure
yourself. yourself.
English - 10 English - 10
English - 8 English - 8
Compression Fitting Compression Fitting
Socket wrench Socket wrench
driver(-) driver(-)
Allen wrench Allen wrench
2018-09-05 2018-09-04 10:48:44 10:46:19 DA68-0
DA68-0 DA68-0