Samsung RF26HFEND Serie Mode D'emploi page 16

Do not overtighten the compression nut. Do not overtighten the compression nut.
• Using Copper Tubing • Using Copper Tubing
- Slip the compression nut and ferrule on copper - Slip the compression nut and ferrule on copper
tubing as shown. tubing as shown.
• Using Plastic Tubing • Using Plastic Tubing
- Insert the molded end(Bulb) of the plastic - Insert the molded end(Bulb) of the plastic
tubing into the compression fi tting. tubing into the compression fi tting.
Do not use without the molded end(Bulb) Do not use without the molded end(Bulb)
of the plastic tubing. of the plastic tubing.
CAUTION CAUTION
3. Tighten the compression nut onto the 3. Tighten the compression nut onto the
compression fi tting. compression fi tting.
4. Turn water on and check for any leakage. 4. Turn water on and check for any leakage.
• Water line must be connected to • Water line must be connected to
drinkable water only. drinkable water only.
• When pushing the Refrigerator back, • When pushing the Refrigerator back,
make sure you don't roll over the power make sure you don't roll over the power
cord or water line (Icemaker supply line). cord or water line (Icemaker supply line).
ICE MAKER OPERATION ICE MAKER OPERATION
The ice maker will produce 8 cubes per cycle The ice maker will produce 8 cubes per cycle
- approximately 100~130 cubes in a 24-hour - approximately 100~130 cubes in a 24-hour
period, depending on freezer compartment period, depending on freezer compartment
temperature, room temperature, number of door temperature, room temperature, number of door
openings and other use conditions. openings and other use conditions.
Throw away the fi rst few batches of ice to allow Throw away the fi rst few batches of ice to allow
the water line to clear. the water line to clear.
Be sure nothing interferes with the sweep of the Be sure nothing interferes with the sweep of the
feeler arm. feeler arm.
When the bin fi lls to the level of the feeler arm, the When the bin fi lls to the level of the feeler arm, the
icemaker will stop producing ice. icemaker will stop producing ice.
After the icemaker has been turned on again, After the icemaker has been turned on again,
there will be a time delay before the icemaker there will be a time delay before the icemaker
resumes operation. resumes operation.
It is normal for several cubes to be joined together. It is normal for several cubes to be joined together.
If ice is not used frequently, old ice cubes will If ice is not used frequently, old ice cubes will
become cloudy, taste stale and shrink. become cloudy, taste stale and shrink.
So if you don't want to make ice, press the Ice Off So if you don't want to make ice, press the Ice Off
button. button.
Test Button Test Button
DA68-02601C-06-(EN+ES+FR).indd 16 DA68-02601C-06-(EN+ES+FR).indd 16
DA68-02601C-00.indb 14 DA68-02601C-00.indb 14
English - 16 English - 16
English - 14 English - 14
2018-09-05 2018-09-04 10:49:00 10:46:27 DA68-0
2014. 8. 18. 2014. 8. 18. 8:46 8:46
DA68-0 DA68-0