Publicité
Les langues disponibles
Les langues disponibles
MAINTENANCE
Remove any residues of food and drops
of grease from the cooking surface by
using the special scraper supplied on
request (Fig.7- cod. Z200355). Clean the
heated area as thoroughly as possible
using suitable products, and a cloth/paper
towel, then rinse with water and dry with
a clean cloth.
Using the special scraper (optional)
immediately remove any fragments of
aluminium and plastic material that have
unintentionally melted on the heated
cooking area, or residues of sugar or food
with a high sugar content (Fig.7). In this
way, any damage to the cooktop surface
can be prevented.
Under
no
circumstances
abrasive sponges, or corrosive chemical
detergents, such as oven sprays or stain
removers, be used.
USE
Use the touch control system in the
corresponding
position
individual cooking needs.
Keep in mind that the higher the number,
the more heat is produced.
TOUCH CONTROL (see Fig.8)
O
N
L M
L M
L L
G
F
E
A. ON/OFF button > switch the appli-
ance ON and OFF
B. Cooking Zone / Slider bar > increase
or reduce power level of the cooking
zone
C. Double cooking zone > activate the
second circuit of the extendable cook-
ing zone
D. Triple cooking zone > activate the
third circuit of the extendable cooking
zone
E . Low Temperature key > allow to
keep a fixed value of temperature
F. Fast Boil key > increase power at
should
according
N
L M
I
M
L
H
B
D
C
A
maximum level faster
G. Lock key /Child lock > activate con-
trol panel lock
H. Display timer
I. Minute minder time Keys (- / +) >
increase or decrease timer value
L. ON/OFF
keys for each cooking zone
switch the cooking zone ON and OFF
M. Clock indicator for each cooking
zone
N. Double cooking zone indicator
O. Triple cooking zone indicator
SWITCHING ON THE HOB
When manufactured, the appliance will
be in the safety position, i.e. control lock
is active and the
In order to use the appliance the safety
function must be deactivated by pressing
the
key until the indicator light switches
off. Press
switch the top on. A beep sounds and all
the cooking zone displays (L zone) show
"0". The control unit remains active for 10
to
seconds. If within this time no cooking
zone is selected, the electronic device
returns automatically to the OFF position
and the above described operation must
be repeated to switch the cooking top on
again.
SWITCHING ON THE COOKING
ZONES
To switch on a cooking zone it is necessary
to select the desired cooking zone key
L L
(L zone). A beep sounds and the cooking
zone on led blinks. The
locked if the key lock is activated, or if
there is any cooking zone error.
SELECTING A POWER LEVEL
FOR A COOKING ZONE
Once the cooking zone is selected, the
power level can be selected by touching
the Slider Bar (B zone). The selected
power level is showed in the cooking
zone display (L zone). The Slider Bar key
will be locked if the key lock is activated.
Once this operation has been completed
you can adjust the temperature with the
Slider Bar (B zone) .
The power of the single cooking zone can
be adjusted in 9 different positions and will
be shown on luminous display (L zone)
key is illuminated.
key (A zone) for 1 sec to
key will be
>
9
Publicité
