Publicité
Les langues disponibles
Les langues disponibles
tone" will be sound. When the time set
on the timer has run out, a "Cycle Finish
tone"sounds for 1 minute, and the timer
display (H zone) blinks the indication
"00" until any of the user interface keys
is touched.
CONTROL PANEL LOCK
It is possible to block the controls to prevent
the risk of unintentional modification of
the settings (children, cleaning etc.).
By touching the
seconds. If the key lock indicator is on, the
keyboard is locked. This function can be
activated when the cooking zones are ON
or when the cooktop is OFF. If the cooktop
is on, this Lock function locks all the keys
except the cooking zone OFF keys, the
ON/OFF key (of the entire cooktop) and
the key lock indicator. Otherwise, when
the cooktop is off, the key lock function
locks all the keys, including the general
ON/OFF key.
The key-lock is always activated at the
start up of the control. Then from the
second start this will no longer happen.
To disable this function is necessary
touching the
key (G key) for 2 seconds.
LOW TEMPERATURE FUNCTION
The "LOW TEMP" function allows us to
keep the temperature at a fixed value.
It is used to keep food warm. Therefore
the cooking zone works with one low
power.
The temperature values are for:
-
Melting (Dissolving)
-
Warming
(keep
temperature constant food
-
Simmering (Simmer) cook just below
the point of boiling.
To activate this function: after a cooking
zone has been selected, touch the Low
Temperature key
sounds and the cooking zone display
shows the selected power level and an
"L" alternating.
To disable this function: after a cooking
zone has been selected, touch the Low
Temperature key
sounds and the cooking zone display
shows the selected power level and
key (G key) for 2
warm)
keep
(E
key). A beep
(E
key). A beep
an "L" alternating. This function can be
enabled/disabled before or after selecting
the power level and when the heater is
on or off.
FAST BOIL FUNCTION
This activity makes it possible to use the
hob's maximum power (for example to
bring water to the boil very quickly).
To activate this function: after a cooking
zone has been selected, touch the Fast
Boil key
the cooking zone display shows the
selected power level and a "P" flashing.
The cooking zone will work at maximum
power level for 10 minutes. After these
minutes the cooking zone will return to
the selected power level.
To disable this function: after a cooking
zone has been selected, touch the Fast
Boil key
and the cooking zone display shows the
selected power level and a "P" flashing.
SWITCHING OFF THE COOKING
ZONES
To switch a cooking zone off, touch
key of the relative zone. A beep sounds,
the cooking zone display shows
the cooking zone led is switched off (if
there is no residual heat).
The cooking zone selection will finish
10 second after the last key is touched
(Slider, Fast Boil, Low Temp, etc...).
SWITCHING OFF THE HOB
To turn off the appliance entirely hold
down the
key.
at
OVERFLOW SECURITY
In case of liquid spills on the cooking
hob (for example water or other liquids)
that might prevent the command from
working properly, the cooking zones will
automatically shut down. In all the hob
displays an "FC" error message will show
together with a beep sound. To return to
the normal operation, you will have to
clean up the cooking hob, by removing
the spilled liquid, shut the appliance down
and then reactivate it.
(F
key). A beep sounds and
(F
key). A beep sounds
and
11
Publicité
