Publicité
Les langues disponibles
Les langues disponibles
with a number from "1 to 9". When the
power level is accepted, a beep sounds,
the cooking zone on led stops blinking.
EXTENDABLE DOUBLE - TRIPLE
COOKING ZONE
The cooktop has extendable cooking
zones that can increase the cooking area.
In this way, the user can utilize pans with
different diameters.
Press the
or
double or the triple circuit of the cooking
zone.
Then, use the Slider Bar
to adjust the power level.
To disable this function: touch the Double
or the Triple cooking zone key (C or D
zone) again.
RESIDUAL HEAT
If the temperature of the cooking zone is
still high after it has been switched off,
the relative indicator will be on (residual
heat).
The signal will only switch off when the
surface temperature has fallen to a safe
level.
TIMER
This function allows establishing the
time (from 1 to 99 minutes), and can be
modified at any time.
The minute minder is switched on by
touching the Timer
If the
key is touched, a beep sounds
and the timer display (H zone) shows
"45". The timer indicator display blinks to
indicate the time selection status.
If
key is touched, a beep sounds and
the timer displays shows "00", and the
timer indicator display blinks to indicate
the time selection status.
To disable the operation of the timer,
select a timer value of "00", using the
key, or switch off the timer by touching
the Timer
and
Select a Cooking zone minute minder:
To select a minute minder associated to a
cooking zone:
- Select the desired cooking zone
- Touch the Timer
to switch on the Timer; the cooking zone
timed led blinks when a cooking zone
minder is selected. If the cooking zone is
10
key to activate the
(B zone)
key (I zone).
or
Keys simultaneously.
or
keys (I zone)
switched off, the corresponding cooking
zone minute minder is switched off.
Select a independent minute minder:
If no cooking zone is selected, press the
timer
or
keys (I zone) to select
the indipendent minute minder.
The indipendent minute minder can
be selected even if the cooktop is off:
touching the timer
the timer. The timer on led blinks when the
independent minute minder is selected. If
the cooktop is off, the independet minute
minder is not switched off.
Minute Minder Time Visualization:
If more than one minute minder is
selected, then the timer displays show the
count down of the timer whose remaining
time is the lowest. The active minute
minder led blinks. If no cooking zone is
selected, touch the timer
to change the indipendent minute minder
time. The timer display (H zone) shows
the selected time, and the timer led blinks.
If a timed cooking zone is selected, the
timer display show the selected timer
time, and the timed cooking zone led
blinks (M zone).
Selecting/changing the time:
If the
or
keys associated with the
timer is held down, the value increases/
decreases
automatically.
increase/ decrease increment/decrement
increases in speed. This makes possible
to reach the desired timer setting more
quickly. The led light timer blinks indicating
the time selection status. The selection
time is confirmed 5 seconds after the
last touch over the timer
When the selection time finishes, a beep
sounds to indicate that the countdown
has initiated.
Starting the timer countdown:
If no key is touched in 5 seconds after the
last operation over the timer
key, the timer selection will switch off. In
this 5 sec, if any cooking zone is selected
the timer selection will switched on and
the timer will be switched on.
Timer elapsed:Timer elapsed:
Timer elapsed:
When timer elapses, a "Cycle Finish
or
key to switch on
or
After
or
keys.
or
key
10
k
Publicité
