DeWalt DWS780 Notice D'instructions Originale page 34

EN G LI S H
MITRE SAW
DWS780
Congratulations!
You have chosen a D WALT tool. Years of experience, thorough
E
product development and innovation make D
reliable partners for professional power tool users.
Technical Data
Voltage
U.K. & Ireland
Type
Power input
Blade diameter
Blade bore
Blade body thickness
Max. blade speed
U.K. & Ireland
Max. cross-cut capacity 90°
Max. mitre capacity 45°
Max. depth of cut 90°
Max. depth of bevel cross-cut 45°
Mitre (max. positions)
Bevel (max. positions)
0° mitre
Resulting width at max. height 112 mm
Resulting width at max. height 110 mm
Resulting height at max. width 345 mm
45° mitre left
Resulting width at max. height 112 mm
Resulting height at max. width 244 mm
45° mitre right
Resulting width at max. height 112 mm
Resulting height at max. width 244 mm
45° bevel left
Resulting width at max. height 63 mm
Resulting height at max. width 345 mm
45° bevel right
Resulting width at max. height 62 mm
Resulting height at max. width 345 mm
Automatic blade brake time
Weight
L (sound pressure)
PA
K (sound pressure uncertainty)
PA
L (sound power)
WA
K (sound power uncertainty)
WA
Vibration total values (triax vector sum) determined according to EN 61029:
Vibration emission value a
h
a =
h
Uncertainty K =
The vibration emission level given in this information sheet has been
measured in accordance with a standardised test given in EN 61029
and may be used to compare one tool with another. It may be used for
a preliminary assessment of exposure.
WARNING: The declared vibration emission level
represents the main applications of the tool. However if
the tool is used for different applications, with different
accessories or poorly maintained, the vibration emission
may differ. This may significantly increase the exposure level
over the total working period.
32
WALT one of the most
E
DWS780
V 230
AC
V 230/115
AC
10
W 1675
mm 305
mm 30
mm 1.8
min 1900–3800
-1
min 1600–3600
-1
mm 349
mm 244
mm 112
mm 56
left 50°
right 60°
left 49°
right 49°
mm 299
mm 303
mm 76
mm 200
mm 76
mm 211
mm 76
mm 268
mm 44
mm 193
mm 28
s < 10
kg 25.4
dB(A) 93
dB(A) 3.0
dB(A) 100
dB(A) 3.0
<
m/s² 2.5
m/s² 1.5
An estimation of the level of exposure to vibration should
also take into account the times when the tool is switched
off or when it is running but not actually doing the job. This
may significantly reduce the exposure level over the total
working period.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and
the accessories, keep the hands warm, organisation of
work patterns.
Fuses
Europe 230 V tools
U.K. & Ireland 230 V tools
U.K. & Ireland 115 V tools
Defi nitions: Safety Guidelines
The definitions below describe the level of severity for each signal word.
Please read the manual and pay attention to these symbols.
DANGER: Indicates an imminently
hazardous situation which, if not avoided, will result in death
or serious injury.
WARNING: Indicates a potentially hazardous situation
which, if not avoided, could result in death or serious
injury.
CAUTION: Indicates a potentially hazardous situation
which, if not avoided, may result in minor or moderate
injury.
NOTICE: Indicates a practice not related to personal
injury which, if not avoided, may result in property
damage.
Denotes risk of electric shock.
Denotes risk of fire.
EC-Declaration of Conformity
MACHINERY DIRECTIVE
DWS780
D WALT declares that these products described under Technical Data
E
are in compliance with:
2006/42/EC, EN 61029-1, EN 61029-2-9.
These products also comply with Directive 2004/108/EC and
2011/65/EU. For more information, please contact D
following address or refer to the back of the manual.
The undersigned is responsible for compilation of the technical file and
makes this declaration on behalf of D
Horst Grossmann
Vice President Engineering and
Product Development
D WALT, Richard-Klinger-Strasse 11,
E
D-65510, Idstein, Germany
01.11.2011
10 Amperes, mains
13 Amperes, in plugs
16 Amperes, mains
WALT at the
E
WALT.
E