Basic Commands; Arm/Lock; Panic Mode - Automate D9857A Mode D'emploi

Example: Performing an advanced command, Silent Arm/Lock
Press the
1.
Then, press the
2.
3. The system arms/locks silently and the remote control con-
firms by LED, but without tones.

Basic Commands

Arm/Lock

Press and release
The vehicle doors lock, siren/horn sound, parking lights flash, and
alarm* features are enabled. The 2-way remote control confirms
by using LED and tone.
If an alarm zone is active (e.g. door is open) an alert message
will follow. If a Valet mode is enabled the 2-way remote control
confirms by using LED and tones accordingly.

Panic Mode

Press and hold
The system arms/locks, then two seconds later begins the Panic
output. The 2-way remote control confirms by using LED and tones.
Press the
Disarm/Unlock
Press and release
The vehicle doors unlock, siren/horn sound, parking lights flash,
and alarm* features are disabled. The 2-way remote control con-
firms by using LED and tone.
If an alarm trigger has occurred an alert message will follow. If a
Valet mode is enabled the 2-way remote control confirms by using
LED and tones accordingly.
6
button once to access Function Level 1.
button immediately to send the command.
or button to stop the panic output anytime.
© 2017 Directed. All rights reserved.