Remote Control Command Table; Basic Commands; Arm/Lock; Panic Mode - Automate 7145A Manuel D'utilisation

Remote Control Command Table

Buttons
or
or

Basic Commands

Arm/Lock

Press and release
The vehicle doors lock, siren/horn sound, parking lights flash, and
alarm* features are enabled.
If an alarm zone is active (e.g. door is open), the system will issue
an alert by emitting one additional siren/horn chirp.

Panic Mode

Press and hold
The system arms/locks, then two seconds later begins the Panic
output. Press the
2
Basic Commands
Arm/Lock (Panic)
Disarm/Unlock
Remote Start
Trunk Release
or button to stop the panic output anytime.
© 2017 Directed. All rights reserved.