Using The System; Commands And Confirmations; Performing Commands - Automate D9857A Mode D'emploi

Using the System

Commands and Confirmations

This quick reference guide only covers basic features. Advanced
features and more information on your system can be found in
the full on-line guide. Please visit us on-line, and search using your
system's model number (found on the front cover, the URL is located
on the back cover):
The remote control sends commands that control the features of
your system. Only the 2-way remote control displays a confirma-
tion of the command using text, icons and tones, the 1-way does
not.
If a command is sent for a feature that is not included in your
system or not available (example: runtime reset when remote start
is off) the remote control displays an alert by text, icon and tone.
If the system doesn't respond to a command the remote control dis-
plays an alert by icon and tone. You may be too far from your ve-
hicle or "out-of-range". Change locations and retry until successful.

Performing Commands

Press any command button directly to send one of the Basic com-
mands to your system.
Press the button 1-4 times before pressing a command button to
send an Advanced command.
The following Remote Control Command table defines the button
press actions required for the Basic and Advanced commands that
may be available for your system.
4
© 2017 Directed. All rights reserved.