Battery Information (1-Way); Battery Replacement; Battery Disposal - Automate D9857A Mode D'emploi

Battery Information (1-way)

The 1-way remote controls are powered by one 3V coin cell lith-
ium battery (RPN* CR-2032) that can be purchased at most re-
tailers. When the battery begins to weaken, the operating range
will be reduced.

Battery Replacement

Unscrew the hardware on unit rear and remove from hous-
1.
ing (if present).
Use a small flat blade screwdriver and insert it into the slot
2.
located along the bottom of the remote, near the key ring.
Carefully pry open the case.
3. Gently slide out the used battery/batteries to remove it from
the holding clip. Orient the new battery for the correct polar-
ity and insert into holding clip.
Realign the case parts and snap together by pressing firmly
4.
and evenly on the front and back. Reinstall screw (if present).

Battery Disposal

Directed cares about the environment. If you need to
dispose of the battery, please do so in accordance with
your municipal requirements for battery disposal.
* RPN (Replcement Part Number).
© 2017 Directed. All rights reserved.
11