Battery Information; Replacing The Battery; Battery Disposal - Automate 7115A Manuel D'utilisation

Battery Information

This system needs no specific maintenance beyond remote control
battery replacement. Depending on your remote control type, the
remote is powered by either two 3V, CR2016 batteries or one 3V
CR2032 battery (see back of remote control for details on battery
type used).

Replacing the Battery

1. Use a small flat blade screw driver and insert it into the slot
located along the bottom of the remote, near the key ring.
Carefully pry open the case.
Remove the old batteries from the holding clip. Orient the
2.
new batteries for the correct polarity and insert into the hold-
ing clip.
Reposition the case parts, then snap together by pressing
3.
firmly and evenly on the front and back.

Battery Disposal

Directed cares about the environment. If you need to
dispose of the battery, please do so in accordance with
your municipal requirements for battery disposal.
© 2017 Directed. All rights reserved.
9