Valet Mode - Automate 7115A Manuel D'utilisation

Valet Mode

Start Valet mode disables remote start features until turned off.
Use the following routine to manually turn on/off the Start Valet
Mode:
Turn the ignition ON and then OFF.
1.
Press and hold the Control Center button for five seconds.
2.
The parking lights flash nine times in rapid succession when
turned on, and nine times in slow succession when turned
off.
Emergency Override*
The following procedure Disarms the system when a programmed
remote is not available. Number of presses__________
Turn the ignition ON.
1.
Press and release the Control Center button the correct num-
2.
ber of times (the default is once).
After a few seconds the siren output ceases and the system
is disarmed.
* Available for systems with security features only.
8
© 2017 Directed. All rights reserved.