Valet Mode - Automate D9857A Mode D'emploi

Valet Mode

Remote Valet Modes
The Valet commands in the remote command table turn on/off
the Alarm Valet/System Valet, Start Valet, or Combo Valet Modes
(both Alarm & Start Valet).
Alarm Valet/System Valet
The Alarm Valet mode will disable included alarm features when
armed/locked. It also disables any passive arm/lock settings
if programmed on. The 2-way remote control confirms by using
LED and tones.
System Valet
On select models, the System Valet will disable both alarm and
remote start features. These systems do not have separate alarm
valet or start valet functions.
Start Valet
The Start Valet mode will disable remote start features until turned
off. The 2-way remote control confirms by using LED and tones.
Combo Valet
The Combo Valet command is used to turn on/off both Alarm
Valet and Start Valet together.
• If both Valets are off then both will be turned on.
• If one or both Valets are on, then they will be turned off.
The 2-way remote control confirms by using LED and tones.
8
© 2017 Directed. All rights reserved.