Connections; Connecting The Input/Output Terminals - Pioneer XDJ-RX Mode D'emploi

Connections

Connect the power cord after all the connections between devices have been completed.
Be sure to turn off the power and unplug the power cord from the power outlet whenever making or changing connections.
Refer to the operating instructions for the component to be connected.
Be sure to use the included power cord.
When using a LAN cable for connection, be sure to use either the LAN cable included with this product or an STP (shielded twisted pair) cable.
Do not disconnect the LAN cable when music files and/or information are being shared using PRO DJ LINK.
This product satisfies electromagnetic noise
regulations when it is connected to other equipment
through shielded cables and connectors.
Use only the furnished accessory connecting cables.

Connecting the input/output terminals

Rear panel, front panel
Headphones
Power amplifier,
powered speakers,
etc.
1
Front panel
1 PHONES terminals
2 MASTER1 terminals
3 MASTER2 terminals
4 BOOTH OUT terminals
5 LINE/PHONO terminals
6 LINE, PHONO selector switch
7 Kensington security slot
10
En
D44-8-2_A1_En
Power amplifier,
powered speakers, etc.
R L
L
R
2 3 4 5
Rear panel
Computer
rekordbox
Power amplifier
(for booth monitor)
DJ player
R L L R
6 7 8 9
8 LINK terminal
9 SIGNAL GND terminal
a
USB terminal
b MIC2 terminal
c MIC1 terminal
d AC IN
DJ
Analog player
software
Microphone
L
R
a 6 5 b c
Microphone
To power outlet
Power cord
d