Assessing The Installation Location; Removing The Cupholders; Removing The Console Back Panel - Dometic GM CCF-T Manuel D'installation Et De Fonctionnement

Preinstallation
6 .1 Assessing the Installation
Location
1. Confirm your vehicle is the correct model, model
year, and trim level to accept the refrigerator. See
"Specifications" on page 6 for more information.
Only trim packages with an integrated center floor
console are eligible.
2. Verify you have the correct parts and tools to perform
the refrigerator installation. See "Tools and Materials"
on page 4 for more information.

6 .2 Removing the Cupholders

q
5 Removing the Cupholders
Cupholders
q
1. Lift up the rubber trim at the front of the cupholders
to access the screw.
2. Use a T15 Torx screwdriver to loosen and remove the
screw.
3. Firmly pull up the cupholders to release the hidden
retainer clips, and remove the cupholders from the
console.
8
w
Screw
w
6 .3 Removing the Console Back
Panel
q

6 Removing the Console Back Panel

Console Back Panel
q
1. Use a T15 Torx screwdriver to remove the screw from
the top of the console back panel.
2. Firmly pull the console back panel away from the
console to release the hidden retainer clips, taking
care not to strain the internal electrical connections.
CCF-T Refrigerator
w
Screw
w
EN