SOUNDMASTER SCD8100 Mode D'emploi page 17

•
Scan setting:
Select the desired option for automatic station search.
- All stations: Search for all stations that can be received. In this case, station search also
stops for weak stations.
- Strong stations only: Only clear stations are searched.
•
Audio setting:
Select the MONO or STEREO for FM reception.
•
System:
See under "SYSTEM SETTINGS".
1. Press repeatedly the " / SOURCE" button, until "CD" is shown in the display.
2. Open the CD compartment and insert an audio CD with the printed side facing upwards on
to the central cone so that the CD clicks into place. Then close the lid of the CD
compartment.
3. The CD will start the playback from the first title.
4. In order to remove a CD, please press the "INFO /
CD out carefully.
Keep always the CD deck closed.
NOTE:
If a disc is inserted with a wrong side face up, respectively if no disc is inserted, then the
message "NO DISC" appears in the display.
Control buttons:
➢ To start or interrupt the playback, press the "ENTER /
➢ To stop the playback, press the "INFO /
➢ With " " button you can jump to the next track.
If the button is kept pressed down, the machine starts to search forwards through the tracks.
The " " button can be used as follows:
Press once = This starts the current track again from the beginning.
Press twice = This jumps back to the previous track.
If the button is kept pressed down, the machine starts to search backwards through the
tracks.
➢ To skip tracks in 10 steps, press the "PRESET / +10" button.
Resume function
If you change the mode or turn off the unit and come back to the CD mode, the unit starts the
playback from the last point.
If you press the "INFO /
(track 1).
" button and start the playback again, the unit starts with the first track
SCD8100 / English Instruction Manual
CD
" button, open the CD door and lift the
" button.
" button.
5