Geberit ESG light Manuel D'utilisation page 18

EN
• Only connect the connecting cable for electrofusion coupling to
the electrofusion sleeve coupling or electrofusion tape once
clean and dry Geberit PE or Geberit Silent-db20 pipes or fittings
have been inserted.
• Do not open the electrofusion machine. Only replace defective
connecting cables for electrofusion coupling with the
corresponding spare part from Geberit.
• Defective mains and coupling connection cables should only be
replaced by an authorised repair shop.
• Replace connecting cables for electrofusion coupling with worn
plugs.
Maintenance and repairs only to be carried out by repair
shops
Electrofusion machines that are not maintained, or are not
professionally maintained, can cause serious accidents.
• Maintain the electrofusion machine according to the regulations.
See "Maintenance", page 26
• Maintenance and repair work may only be performed by
authorised repair shops. For addresses of authorised repair
shops, contact your Geberit sales company or visit
www.geberit.com.
Notes in accordance with DIN EN 62841-1
The "Basic safety notes for electric tools" document accompanies
the device. This contains additional safety notes in accordance
with DIN EN 62841-1:2016-07.
18
9007201520403851-1 © 05-2017
967.778.00.0 (01)