Geberit ESG light Manuel D'utilisation page 16

EN
Basic safety notes
Intended use
The Geberit electrofusion machine ESG light may only be used
for welding:
• Geberit electrofusion sleeve couplings ø 40–160 mm with
Geberit PE and Geberit Silent-db20 pipes and fittings
• Geberit electrofusion tapes for anchor point ø 50–315 mm with
Geberit PE pipes and fittings
The Geberit electrofusion machine ESG light is exclusively
intended to be used in accordance with these operating
instructions. Other uses are deemed to be improper and can lead
to serious injury or death.
The Geberit electrofusion machine ESG light may not be
connected to a public power supply system except with the
approval of the power supplier.
User qualifications
Without suitable training, users cannot detect or may incorrectly
estimate the hazards presented by the electrofusion machine. They
are therefore at risk of seriously injuring themselves or others.
• Skilled persons qualified in pipe installations only may be
permitted to use the electrofusion machine.
• Users must be conversant with and apply country-specific safety
regulations.
• Users working with the electrofusion machine for the first time
must have been instructed by an expert in the safe handling of
the electrofusion machine or have attended a specialist course.
• This machine may be used by children as well as persons with
reduced physical, sensory or mental capabilities or a lack of
experience with and knowledge about the machine, provided
that they are supervised or taught how to use the machine
safely and that they understand the hazards that may result from
this.
16
9007201520403851-1 © 05-2017
967.778.00.0 (01)