Authorized Use; Restrictions; Predictable Misuse - Burkert 2030 Manuel D'utilisation

2. auThOrized use
non-authorized use of the devices may be dangerous to people,
nearby equipment and the environment.
• The diaphragm valves of Types 2030, 2031, 2031 K, 2032, 2033
and 2037 are designed for the control of contaminated, ultra-pure
or sterile media, as well as for abrasive or aggressive media (also
with higher viscosity). The devices may be used only for media
which do not attack the housing and seal materials (see rating
plate). Information on the resistance of materials to the media is
available from your Bürkert sales office.
• During use observe the authorized data, the operating conditions
and conditions of use specified in the contract documents and
operating instructions. These are described in the chapters System
Description and Technical Data.
• The device may be used only in conjunction with third-party devices
and components recommended and authorized by Bürkert.
• Correct transportation, correct storage and installation and care-
ful use and maintenance are essential for reliable and faultless
operation.
• Use the device only as intended.
6
English
Types 2 030, 2031, 2031 K, 2032,

Authorized Use

2.1.

restrictions

If exporting the system/device, observe any existing restrictions.
2.1.1. explosion protection approval
The explosion protection approval is only valid if you use the modules
and components authorized by Bürkert, as described in these oper-
ating instructions.
If you make unauthorized changes to the system, the modules or com-
ponents, the explosion protection approval will also be terminated.
2.2. predictable Misuse
• Do not introduce media, which attack the housing or seal mate-
rials, into the media connections of the system. The Bürkert resis-
tance table of materials can be found on the Internet at
www.burkert.com Documentation
Chemical Resistance Chart.
• Do not put any loads on the housing (e.g. by placing objects on it
or standing on it).
• Do not make any external modifications to the device housings.
not paint the housing parts or screws.
2033, 2037
Brochures & Catalogues
Do