Basic Safety Instructions - Burkert 2030 Manuel D'utilisation

Types 2030, 2031, 2031 K, 2032,

Basic Safety Instructions

3. Basic safeTy
insTrucTiOns
These safety instructions do not make allowance for any
• Contingencies and events which may arise during the installation,
operation and maintenance of the devices.
• Local safety regulations – the operator is responsible for observing
these regulations, also with reference to the installation personnel.
Danger!
danger – high pressure!
• Before loosening the lines and valves, turn off the pressure and
vent the lines.
danger of bursting from overpressure!
• Observe the specifications on the rating plate for max. control
and medium pressure.
• Observe permitted medium temperature.
Warning!
risk of electric shock!
• Before reaching into the device or the equipment,
power supply and secure to prevent reactivation!
• Observe applicable accident prevention and safety regulations
for electrical equipment!
2033, 2037
switch off the
CauTion!
risk of burns/risk of fire if used continuously through hot
device surface!
• Keep the device away from highly flammable substances and
media and do not touch with bare hands.
Warning!
general hazardous situations.
To prevent injury, ensure that:
• The system cannot be activated unintentionally.
• Installation and repair work may be carried out by authorized
technicians only and with the appropriate tools.
• After an interruption in the power supply or pneumatic supply,
ensure that the process is restarted in a defined or controlled
manner.
• The device may be operated only when in perfect condition and
in consideration of the operating instructions.
• The general rules of technology apply to application planning
and operation of the device.
The diaphragm valves Types 2030, 2031, 2031 K, 2032,
2033 and 2037 were developed with due consideration
given to the accepted safety rules and are state-of-the-art.
Nevertheless, dangerous situations may occur.
English
7