Grafik Eye 4000 Serie Mode D'emploi page 19

ZONE 5 ZONE 6
3
Set scene's
fade-in time
R
FADE TEMPORARY
ZONE ZONES
M S
MASTER
3. Set the fade-in time for this scene (does not apply to
shades). Press the FADE 5 or 6 button to make the fade-
in time anything from 0–59 seconds or 1–60 minutes.
The M and S indicators under the FADE window show
whether fade is "M"inutes or "S"econds. To set the fade
in minutes, press the FADE 5 button to scroll through
0–59 seconds to 1–60 minutes, then M lights. Fade is now
expressed in minutes. To get back to seconds, press the
FADE 6 button until the window shows "S"econds.
4. Repeat steps 1 through 3 to set up each of the remaining
scenes.
To set a Fade-to-OFF time, press the OFF scene button,
then set the seconds or minutes to fade to OFF from this
scene.
GRAFIK Eye 4000 Series Control Unit Installer's Guide 19
®