Panasonic U-16GE3E5 Mode D'emploi page 4

Outdoor unit control board
2-1. Display and settings using the keys
 Essentially all display and setting operations can be completed using the UP, DOWN, and SET keys.
 Information is displayed with a 6-digit, 7-segment LED.
 Pressing the HOME key at any time returns to normal display.
2-2. Basic key operations
 To select a menu item, use the UP and DOWN keys to display the item, then press the SET key to select it.
 To change a setting value, use the UP and DOWN keys to display the new value, then press the SET keys to confirm it.
 If the SET key is pressed and held for 1 second while operation data is displayed, the setting mode is canceled.
2-3. Selecting a setting item
(1) Press the UP and DOWN keys to display the menu item to set. (During and after menu item change, the menu item number
is displayed for approximately 1 second, and then the status/setting is displayed.)
(2) After the menu item is displayed, press the SET key to select that item.
* The HOME key can be pressed at any time to return to the
that were in progress are lost. In addition, if there are no operations for a period of 10 minutes while any menu item other
than
settings that were in progress are lost.
Table 1
Menu item
is displayed, the display automatically return to the
Status/setting
display
Display operating data (Usual display)
Display trouble data (Reset trouble; display history)
Display oil change timing (Clear change time; add oil)
Display model (Set speed)
Force test run setting for outdoor unit (Open valve; water circulation; close
bypass valve)
Set outdoor unit
Set indoor unit
Set generator
Force engine speed setting
Display indoor unit status
Initial settings (address, number of indoor units, engine gas type)
Date display (time display, clock display)
EN - 4
menu item. In this case, change to settings
menu item and any changes to
Menu item contents