SilverCrest SWEW 750 C1 Instructions D'utilisation Et Consignes De Sécurité page 8

Protect the power cord against
damages . Do not let it hang over
sharp edges, do not squeeze or
bend it . Keep the power cord
away from hot surfaces and open
flames .
Operation
The product must not be left
unattended while it is connected
to the supply mains .
Do not move the product while it
is in operation .
Do not use the product without an
inserted set of plates .
Do not place the product on hot
plates (gas, electric, coal cooking
range etc .) . Operate the product
on a level, stable, clean, heat-
resistant and dry surface .
Do not cover the product while it
is in use or shortly after use, when
it is still hot .
Make sure that the power cord
is not pinched by the plates or
touches the rim of the plates .
The use of extension cords is not
recommended .
If the use of an extension cord is
necessary, it must be designed for
a current flow of at least 10 A .
Lay cords in such a way that
they may not be tripped over or
otherwise damaged .
The product is not intended to
be operated by means of an
external timer or separate remote-
control system .
Cleaning and storage
m WARNING! Risk of injury!
Disconnect the product from the
power supply before cleaning
work and when not in use .
Do not store the hot product in a
cupboard or in the packaging .
Do not pull the power plug out of
the electrical outlet by the power
cord .
Protect the product, its power
cord and power plug against
dust, direct sunlight, dripping and
splashing water .
Store the product in a cool, dry
place, protected from moisture
and out of the reach of children .
GB/IE/NI 9