Control And Display Elements, Connections - AVL DITEST SPEED 2000 Manuel D'utilisation

AVL DiTEST Speed 2000
3

Control and Display Elements, Connections

3.1 AVL DiTEST Speed 2000
Fig. 3-1
Operating manual
Power supply socket of the AVL DiTEST Speed 2000. When an AVL
exhaust gas tester is connected, no external power supply is needed -
the AVL DiTEST Speed 2000 is powered by the AVL exhaust gas
tester.
Switching operating mode from car or truck to 4- or 2-stroke
motorcycle.
Connection bar for inductive trigger clamp
(issues a simulated ignition voltage signal, gasoline engine speed
measurement).
Connection socket for AVL exhaust gas tester or universal adapter
(issues a simulated clamp-on transducer signal, diesel engine speed
measurement).
Connection socket for AVL Dual Sensor.
Status LEDs (red, yellow and green)
Speed detection control (mounting point).
ENGLISH
17