Lateral Isolator; Swivel; Absorber - Grammer MAXIMO Professional Mode D'emploi

Seat functions and operation
* if fitted ** depending on model
28

Lateral isolator * ***

Under certain operating conditions, it is useful
to activate the lateral isolator. This means that
lateral shock impacts can be better absorbed by
the driver's seat.
The cushioning effect can be activated with the
help of this locking lever.
1 Lateral isolator ON
2 Lateral isolator OFF

Swivel *

The swivel is released by pulling the locking
lever. The seat can then be swivelled by 20° to
the right or to the left. It can be locked into
position at steps of 10° .
WARNING. Risk of accident!
Do not operate the locking lever for
swivel while driving.
After the adjustment, the locking lever
must latch into the desired position with an
audible click. It should not be possible to move
the driver's seat into another position when it is
locked.

Absorber * **

The absorber setting of the seat can be varied
to suit the on and off-road driving conditions.
The cushioning effect can be individually
adjusted for this purpose.
Turn the lever to the desired position and
release
1 soft
2 medium
3 hard
Position 2 is the basic setting recommended by
the manufacturer for an average driver's weight.
With model MAXIMO Dynamic the shock
absorber settings are automatically adjusted
during travel..
It is not necessary to operate a control element
to carry out the adjustment.
*** optional extra
GB