Default Settings; Set Temperature - Sentiotec WORLD OF WELLNESS wave.com4 Instructions De Montage Et Mode D'emploi

Instructions for use for the user

4.5. Default settings

Operating mode:
AutoDisplay:
Timer beep:
Water deficiency beep:
Target temperature:
FIN
HUM
Temperature rectification:
Humidity rectification:
Airing programme:
Target temperature:
Drying time:
Switch-on time (maximum):
Automatic switch-on:

4.6. Set temperature

7
With the key
5 6
the and keys.
After approx 3 secs. (without pressing the keys again), the control unit automa-
tically reverts to the previous display (actual temperature).
Possible temperature range:
WORLD OF WELLNESS
FIN
OFF
ON
OFF
75°C
50 %
0°C
0 %
80°C
Heating + ventilator [15 minutes]
Ventilator [15 minutes]
4 hours
1 hour OFF
change to the symbol
9
and set the desired temperature with
FIN < 110 °C
FEU < 70 °C (Figure 9)
p. 20/42