Sentiotec WORLD OF WELLNESS wave.com4 Instructions De Montage Et Mode D'emploi page 55

Installation instructions, only for experts p. 13/42
Mounting of the humidity sensor
(optional: only WC4-H-PCB)
Mount the humidity sensor WC4-H-H (3-wire) at the centre of the lateral wall
further from the heater at a height of approx. 1.5 m (siehe Figure 6 und Figure
7). The sensor cables are also conducted through the cabin wall here.
Heaters sensor
Humidity sensor
EN
Figure 7: mounting of humidity sensors
WORLD OF WELLNESS