dB Technologies Sigma S218 Caractéristiques Techniques page 28

CASE B (STEREO connection between a subwoofer and 2 speakers)
1. Connect mixer L, R outputs to subwoofer INPUTS 1 and 2 respectively.
2. Daisy-chain the signal to the speakers connecting OUTPUTS 1 to LH speaker Input, and OUTPUTS 2 to RH
speaker Input.
3. For each speaker, select the type of input impedance on LINE.
4. Select XOVER [4] frequency and set subwoofer OUTPUTS MODE [4] to XOVER, in order to daisy-chain a
signal filtered to the crossover frequency to the speaker.
SIGMA S218
28
English
Cod. 420120258 REV. 1.0