Cleaning And Care; Troubleshooting; Warranty - Gazzini 10036243 Traduction Du Mode D'emploi Original

7 | CLEANING AND CARE

Use warm soapy water or a motorcycle cleaner and a soft
cloth to clean the turn signals. Do not use a harsh cleaner which
could corrode the aluminium and do not use a high-pressure
cleaner, as it may damage seals and the adhesive pad, and
drive water into the turn signal. After cleaning, use a wax-based
product which will protect the surface from the elements.

8 | TROUBLESHOOTING

Fault
The turn signal
does not light up.
The turn signal
flashes too fast
or too slow.

9 | WARRANTY

This gazzini turn signal comes with the statutory two-year war-
ranty. The warranty period begins on the date of purchase. The
warranty does not cover normal wear and tear, use for anything
other than the intended purpose, or damage caused by an
accident, manipulation or an attempt to carry out repairs by
unauthorised customer service departments or people.
24
Possible causes and remedies
It is possible that the positive/negative
power cables are wrongly connected.
Check that positive is connected to positive
and negative to negative. The battery
voltage may be too low for the turn signal
to function. Check the battery voltage.
A load-independent relay must be installed
because the output power of the original
turn signal does not match that of the
gazzini turn signal. If a relay cannot be
installed, resistors must be used instead.
(See chapter 4.4 Electrical connection).