Using The Microphone(S) - Medion LIFE P61800 Notice D'utilisation

You will find more information about the Bluetooth function and the
operation of your audio output device in the relevant user manual.
The device name of the party sound system (MD 44800) is displayed as soon as it
finds a signal.
 If you are prompted to enter a password, enter 0000.
Device pairing is complete when the PAIR LED continuously lights up blue and a
signal tone sounds.
Please note that not all operating functions may be available on the
party sound system in Bluetooth mode due to the different firmware
and software versions.
 Press and hold the
disconnect the current Bluetooth connection and start a new pairing process.

11. Using the microphone(s)

A microphone can be used in any operating mode.
You can use up to 2 microphones at the same time. 1 microphone is already
included in the package contents, additional microphones can be purchased from
specialist retailers.
Follow these steps to connect the microphones:
 If necessary, switch off the party sound system.
 Plug the microphone into the microphone socket you want to use, MIC 1 or MIC 2.
 Slide the On/Off switch on the microphone to the ON position and switch on the
party sound system.
 After use, slide the microphone switch to the OFF position to switch it off.
Operating instructions for using microphones from other manufacturers
can be found in the relevant user manual.
 Use the
MIC VOL. and MIC VOL.
you require.
 Press and hold the EQ/ECHO button to activate the microphone echo sound
effect.
 Press and hold the EQ/ECHO button again to deactivate the microphone echo
sound effect.
If a microphone is connected to the party sound system, you can use the
KEY function to change the sound of your voice to create amusing vocal effects.
 Press the KEY button to activate the KEY function.
 Press the KEY button again to deactivate the KEY function.
/PAIR/SCAN button for approximately 2 seconds to
buttons to set the microphone volume
DE
EN
FR
NL
IT
ES
PL
53