Starting The Machine; Maintenance; Direct Water Drainage - Kruger Airsec 265 AH Mode D'emploi

Starting the machine

Close doors and windows
Insert mains plug
Check correct positioning of water tank
Set the hydrostat switch to the desired setting (usually, the NORMAL position)
The machine works automatically, i.e. as soon as the level of dryness set on the controller
is reached, the dehumidifier switches off and only starts working again when the humidity
level rises. We recommend that you fit a hygrometer in the room in order to check the humi-
dity levels. If the humidity level is too high, turn the hygrostat controller to the right; if the
humidity is too low, turn the controller to the left.

Maintenance

When the water tank is full, the unit switches off automatically
and the indicator light on the front of the machine is illuminated.
Turn hygrostat controller to «O»
Take hold of the tank with both hands and remove carefully
Empty tank (do not re-insert half full)
Replace tank correctly
Reset hygrostat controller to previous position

Direct water drainage

If required, the collected water can be drained directly.
Remove water tank (store for possible future use)
Attach 3/4" GHT drain plug to the water collector (extras)
Attach hose to plug
Place the other end of the hose in a waste pipe
45