Publicité
SPECIAL TOOLS
The proper special tools are necessary for complete and accurate tune-up and assembly. Using the
correct special tool will help prevent damage caused by the use of improper tools or improvised
techniques. The shape and part number used for the special tool differ by country, so two types are
provided. Refer to the list provided to avoid errors when placing an order.
NOTE:
• For U.S.A. and Canada, use part number starting with "YM-", "YU-", "YS-" or "ACC-".
• For others, use part number starting with "90890-".
Part number
YM-08035-A, 90890-01311
Tool name/How to use
Weight
These tools are used when removing or installing the
Use this tool to inspect the coil resistance, output
voltage and amperage.
This tool is needed to remove and install the valve
assemblies.
This tool is needed to remove and install the valve
assemblies.
This tool is used to remove the piston pin.
This gauge is used to measure the fuel level in the
float chamber.
This tool is necessary for adjusting valve clearance.
SPECIAL TOOLS
YU-01083-3
YU-01083-1
YU-03112-C
YM-04019
YM-04108
YU-01304
YM-01312-A
YM-08035-A
1 - 6
GEN
INFO
Illustration
90890-01084
90890-01083
90890-03112
90890-04019
90890-04108
90890-01304
90890-01312
90890-01311
Publicité
Chapitres
