Publicité
ELECTRIC STARTING SYSTEM
EC624000
COUPLERS AND LEADS CONNECTION
INSPECTION
1. Check:
STARTER MOTOR OPERATION
1. Connect the positive battery terminal 1
• A wire that is used as a jumper lead must
have at least the same capacity or more
as that of the a battery lead, otherwise the
jumper lead may burn.
• This check is likely to produce sparks,
therefore make sure nothing flammable is
in the vicinity.
6 - 7
• Couplers and leads connection
Rust/dust/looseness/short-circuit →
Repair or replace.
and starter motor lead 2 with a jumper
lead 3.
Not operate → Repair or replace the
starter motor.
WARNING
–
+
ELEC
Publicité
Chapitres
