Publicité
È
É
IGNITION SYSTEM
EC622001
SPARK GAP TEST
1. Disconnect the spark plug cap from spark
2. Connect
È For USA and CDN
É Except for USA and CDN
3. Turn the main switch to "ON".
4. Push the starter switch.
5. Check the ignition spark gap.
6. Start engine, and increase spark gap until
EC624000
COUPLERS AND LEADS CONNECTION
INSPECTION
1. Check:
MAIN SWITCH INSPECTION
1. Inspect:
R
Br
2
1
Incorrect continuity → Replace.
6 - 3
plug.
the
opama
checker 1 (ignition checker 2) as shown.
• Spark plug cap 3
• Spark plug 4
misfire occurs. (for USA and CDN only)
Minimum spark gap:
6.0 mm (0.24 in)
• Couplers and leads connection
Rust/dust/looseness/short-circuit →
Repair or replace.
• Main switch continuity
Check for continuity as follows:
Tester (+) lead → Red lead 1
Tester (–) lead → Brown lead 2
R
1
ON
OFF
–
+
ELEC
pet-4000
spark
Br
Tester selec-
2
tor position
Ω × 1
Publicité
Chapitres
