Table des Matières
Publicité
10
SPECIFICATIONS
ENGINE SPECIFICATION
TYPE:
Model:
Ignition system:
Spark plug:
Camshaft:
Max. Camshaft Speed:
No load max. speed:
No load min.speed:
Lubrication system:
Oil Sump Capacity:
Fuel:
Fuel Tank Capacity:
MACHINE SPECIFICATION
Chassis series RH, UZ:
Chassis series VH
Transmission:
Primary:
Secondary:
Traction:
Cylinder:
Clutches:
Front roll:
Landroll:
Transport wheels:
Brakes:
Landroll:
Wheels:
GB
Kubota 2.8KW (3.7HP) @
3600 RPM, Vertical, single
cylinder , Air cooled,
121cc (7.39 cu.in), OHV,
four cycle, recoil starter with
mechanical decompression
system, Petrol engine.
GH120 - R4
Non-contact magnet ignition
BP6HS
2 : 1 reduction
1800 RPM
1800 RPM
750 RPM
Splash lubrication
0.55 litres (1 Imp.pints)
(0.58 US qts)
Lead free petrol
3 litres (5.3 Imp. pints)
(6.36 US pints)
Bolted frame with forged
section cross members and
flat steel end plates.
Bolted frame with forged
section cross members and
flat aluminium end plates.
Double Vee belts.
Synchronous toothed belt.
Synchronous toothed belt.
Synchronous toothed belt.
Belt clutch on primary
transmission.
Peg clutch on cylinder drive
62.3mm (2.5in) Grooved or
smooth full width all
aluminium roll running on
double taper roller spring
loaded bearings each end
on stubshafts.
203mm (8in) machined
aluminium landroll with
automotive style nylon gear
differential central in two
piece roll.
4 x 4.00 4ply diamond
pattern pneumatic tyres
100mm (4in) band brake on
primary layshaft.
60mm (2 3/8in) band brake
on each end of traction drive
roller shaft.
Publicité
Table des Matières
