Remote Control - Yamaha DVX-S200 Mode D'emploi

Appendix

Remote Control

The Remote Control does not work.
1 You are outside the Remote Control
Cause
operating range.
Operate the Remote Control within 6 m (20
Solution
feet) and a 30° angle of the Remote Control
Sensor.
2 The Remote Control Sensor is exposed to
Cause
direct sunlight or lighting (inverted
fluorescent lamps).
Change the lighting or CinemaStation's
Solution
orientation.
3 The batteries are worn out.
Cause
Replace the batteries with new ones.
Solution
4 You did not select the device to operate.
Cause
Press the Input Selection buttons to select
Solution
the device you want to operate.
Remote Control does not work with
CinemaStation.
You did not select the mode to operate
Cause
CinemaStation.
Press DVD/CD, AMP or TUNER on the
Solution
Remote Control before starting operation.
102
A peripheral device does not work with the
Remote Control.
1 You cannot operate a system component.
Cause
Use the remote control that came with the
Solution
device to operate it.
2 You did not correctly set the manufacturer
Cause
code.
• Set the manufacturer code once again.
Solution
See page 84.
• Set a different code from the list of codes
for the same manufacturer. See pages 87
and 88.
3 The Remote Control is not compatible with
Cause
your equipment.
Use the remote control that came with the
Solution
device to operate it.