Dubbing From A Video Camera To A Vcr - Yamaha DVX-S200 Mode D'emploi

Dubbing from a Video Camera to a VCR

DVR-S200 WB56620
POWER
POWER
AUDIO ANGLE
/DTS SELECT MATRIX 6.1
REPEAT
NIGHT
SW CENTER
AMP
DVD/CD
VCR
MD/CD-R TUNER
MOVIE MUSIC SPORTS
CINEMA
Connecting with SCART cable (U.K. and Europe models only)
Do not connect CinemaStation to a monitor via a VCR. The copyright protection
technology incorporated in CinemaStation may not allow the video to play.
CinemaStation
Note
• If you play a video source that uses scrambled or encoded signals to prevent it from being dubbed, the picture itself may be
disturbed due to those signals.
For video camera and VCR operations, be sure to read
their respective owner's manuals.
POWER
TV
SUBTITLE
STEREO
A-B
SURR
SHIFT
VIDEO 1
VIDEO 1
VIDEO 2
VIDEO 2
GAME
Turn on the TV.
Turn on the video camera and VCR.
Switch the TV input.
For example, switch to video 1 if CinemaStation is
connected to video input 1 on the television.
Press POWER to turn on CinemaStation.
Press VIDEO 1 or VIDEO 2 according to the jacks
connected to the video camera.
CinemaStation can now input video signal (video
camera).
Note
• Press VIDEO for U.K. and Europe models.
Prepare to record with the VCR.
For example, switch the VCR input to external.
Start playback on the video camera, then start
recording with the VCR.
VCR
Using Other Equipment
TV
49