More Information About Dsp (Surround) Effects; Selecting Dsp Program Effects; Using Matrix 6.1 - Yamaha DVX-S200 Mode D'emploi

Selecting DSP Program Effects

Select a sound field based on
how many speakers you want
to have sound.
• For a 6-speaker plus surround
back speaker setup, see page 65,

"Using Matrix 6.1".

• For a 6-speaker setup, see page
67, "Using All Speakers for CD
or Video Playback".
• For a 2-speaker setup, see page
69, "Using Front Speakers Only
for DSP Program (Virtual
Cinema DSP)".
Using Matrix 6.1
DVR-S200 WB56620
POWER
AUDIO ANGLE
SELECT MATRIX 6.1
/DTS
REPEAT
NIGHT
SW CENTER
SHIFT
TV INPUT
TV CH
A B C D E
SLEEP
PRESET
ON SCREEN
CH
ENTER
STATUS
TEST
VOLUME
TV VOL
MUTE
AMP
DVD/CD VIDEO 1
VCR
MD/CD-R TUNER VIDEO 2
MOVIE MUSIC SPORTS
CINEMA
To get the most out of CinemaStation, select a sound field based on how
many speakers you want to use and the listening environment.
Select a sound field based on
your listening environment
• For headphones, see page 70,
"Using a DSP Program with
Headphones ("SILENT
CINEMA")".
• For evening enjoyment, see page
71, "Using a DSP Program with
Low Volume (Night Listening)".
• For setting a DSP Program to
match your listening room, see
page 72, "Changing the Delay
Time of a DSP Program".
Advice
• CinemaStation cannot use DSP Programs when playing Super Audio CDs.
POWER
TV
SUBTITLE
MATRIX 6.1
STEREO
A-B
SURR
PRESET
MENU
SET MENU
CH
RETURN
AMP
GAME

More Information about DSP (Surround) Effects

Enjoy original Dolby and DTS
sound
Matrix 6.1 sound creates a realistic sense of sonic
movement with a surround back sound.
You can enjoy Dolby Digital plus Matrix 6.1 or DTS plus
Matrix 6.1 sound without adjusting any settings when you
play a Dolby Digital Surround EX or DTS ES disc.
In addition to Dolby Digital Surround EX or DTS ES discs,
you can also enjoy Matrix 6.1 sound with a 5.1 channel
source. Selecting Matrix 6.1 with the MATRIX 6.1 button
will enable the Dolby Digital plus Matrix 6.1 and DTS plus
Matrix 6.1 decoder. The surround L/R channel will produce
a surround back channel, making it possible to output
sound from a virtual surround back speaker.
Press AMP.
Press MATRIX 6.1 to set.
The display indicator switches in the following order each
time you press MATRIX 6.1 : AUTO (auto-recognition)
→ Matrix 6.1 (Matrix audio) → OFF → AUTO...
• To listen to original Dolby or
DTS sound as it is, see page 74,
"Reproducing the Original
Dolby and DTS Sound".
• To listen to stereo sound as it is,
see page 75, "Reproducing
Stereo Sound".
65