Creating the Best Listening Space
When attaching to a speaker stand and bracket
56
Mounting bracket
(supplied)
Screw (supplied)
60 mm
Use the supplied screw to attach the mounting
bracket to the bottom of the speaker.
The jutting part of the bracket enters the groove at the
speaker base.
Use the bracket holes (60 mm spacing) to fasten
the mounting bracket to the speaker stand.
Use the screws (4 mm dia.), spring washers and washers.
Advice
• When attaching to a speaker stand and bracket, be sure to read their
respective owner's manuals.
• When attaching to the optional SPS-200 Speaker Stands, you do not
need to attach the supplied mounting brackets.