Error Messages - grandimpianti GH6V B0005203000 Manuel D'installation, De Maintenance Et D'utilisation

Troubleshooting

Error messages

If an error occurs during the programme a
message is shown on the display. To exit the
message after taking measures, turn the machine
off and then back on.
The error messages that may be shown in the
display are:
Close the door
Close the washer door and the programme will
start.
Overfilling
1. Shut off the water tap.
2. See "Drainage error".
Drainage error
Press the Door opening button (key symbol) to
empty the machine of water before opening the
washer door. If this does not resolve the problem,
call the service division.
Part 2 Serial number < B0005202999
Water inlet fault
Check:
• that the tap on the water pipe is open.
• that the filter in the machine's water intake is
not blocked.
Action:
1. Shut off the water tap.
2. Unscrew the hose.
3. Clean the filter in the intake valve on the
machine.
4. Screw the hose back on.
5. Turn on the tap.
6. Run the program again to check if the fault is
fixed.
7. If this does not resolve the problem, call the
service division.
Door opening error
Call the service division!
Motor fault
Call the service division!
17