Mounting And Connection Of The Bt-Lh80W/Wu - Panasonic AG-CA300G Mode D'emploi

Mounting and Connection of the BT-LH80W/WU

Mount the unit to a BT-LH80W/WU using the following procedure:
1
Mount the BT-LH80W/WU on the handle unit of the camera recorder as shown.
2
Connect the VF OUT connector of the unit with the BT-LH80W/WU using the included VF cable.
Connect the D-Sub connector to the GPI connector of the BT-LH80W/WU. Connect the BNC
connector (black) to the Y input connector, the BNC connector (blue) to the P
the BNC connector (red) to the P
* Use a mount that can withstand the weight of the BT-LH80W/WU (1.5 kg).
E-19
BNC connector
BT-LH80W/WU
D-Sub connector
GPI control
Mount *
(commercially available)
input connector.
R
BNC connector
Y (Black)
P
(Red)
R
P
(Blue)
B
GPI
D-Sub connector
(Connect to the VF OUT connector.)
VF cable
(included)
input connector, and
B